Before we get started, an important disclosure
Ever since I began dipping my toes into the wildlife photography waters, I’ve been using a kayak to gain a more unique perspective on some of my chosen subjects, often grizzly bears. Whenever I post a photo of my kayak setup, I receive many questions about the equipment that I’m using so I figured it needed it’s own section in my Gear Guide. What you see detailed below, is all of the gear I currently use for water-based photo missions. I should point out that the Wilderness Systems kayak is currently the only one that I own, but I have also rented or borrowed several other kinds of kayaks to suit other situations. The Commander 120 kayak is not suitable for anything other than calm water, so oceans and rivers require a different solution.
Wilderness Systems Commander 120
The commander is a fishing kayak, and that means that it’s designed to be stable enough to stand up in and cast a rod. Of course, this also makes it an excellent and very stable photography platform which is why I chose it. The back section of the kayak is also sized to hold a cooler and fishing gear, and comes with elastic webbing to secure everything. Again, this suits photographic purposes very well as I can put a pelican case in there, among other things, instead of a cooler. The seat is also reasonably comfortable for several hours of paddling, and whilst the large tripod and camera setup looks precarious to some people, I assure you that I’ve never once been worried about capsizing this kayak. The only downside to this particular boat is that the open top does make it susceptible to water intake on days when strong winds are lashing up the water, and it’s also not a boat you’d want to take into any kind of white water or waves.
RRS TVC-24L Tripod
You can read a bit more about why I own the TVC-24L in general, in the tripod section of this gear guide, and whilst I have a few tripods, this is always the one I put into the kayak because I need something extremely sturdy so that I can strap it down with a lot of tension in the webbing and not be fearful of breaking the tripod. Once my setup is installed and tied into the kayak, it’s absolutely rock solid. Other sturdy tripods can work as well of course, but it’s important that it has a very strong metal hook on the underside of the tripod plate. This is where the webbing gets attached, and allows me to be pulling the tripod downwards towards the kayak’s base. It’s also quite important to have a tripod which doesn’t have a centre column as this will interfere with your legs, and take up valuable storage space. When the camera isn’t mounted to the tripod, it’s stored between my legs, and if there was a protruding centre column coming down from the tripod, that wouldn’t work.
Sample Photo Taken from Kayak
RRS PG-02 LLR Gimbal Head
Again, you can read a bit more about al the things I use this head for in the tripod section of the gear guide, but this is also a crucial piece of the puzzle for me. A gimbal allows me to quickly reposition the camera with minimal effort, and unlike a ballhead, I don’t need to worry about keeping a hand on the ballhead locking knob to constantly lock and release it. When you’re trying to steady a long lens on a moving platform, the last thing you want is to have to do it with only one hand on the camera. There are many gimbals on the market, but I like the RRS one because it comes apart for easy packing, and also doubles up as a multi-row panoramic head. If I have to do a variety of types of photography on a trip, I can pack this one head and get it all done. A few years ago I made a little video about it:
Tie Downs With Cam Locks
I use a couple of camlock tie downs to secure my setup into the kayak. One runs to the front of the boat and pulls the tripod in the forward direction, and another run from the baseplate of the tripod down and backwards. This opposes the forward pull of the first tie down, and pulls the tripod feet tight into the bottom of the boat. When these two straps are cranked tight, you can’t budge it even an eighth or an inch. Every kayak is going to be different, but when choosing one, pay close attention to where you will have solid points to pass tie downs around. The Commander 120 has a metal bar across the front as you see in the photos, and it also has metal bars inside for the seat rails which act as the second anchor point.
Dry bags are definitely your friend when you’re working on the water. It doesn’t matter if you don’t plan on capsizing, you will end up with water in the boat at some point. Whether it’s from wind spray or drips from your paddles. Always pack a variety of different dry bag sizes! After many trips, I’ve settled on using the Arcteryx Alpha FL45 backpack as a solution for keeping my camera dry when it’s not on the tripod. I like having the backpack straps for carrying the camera to and from the water, and the straps are low profile enough that you don’t notice them getting in the way when it’s in the boat. I also use a small generic brand dry bag that I hang from the hook of my tripod. In this one I store my memory card holder and spare camera batteries. It’s all very well having lots of storage space in the kayak, but it’s tricky to access all of it when you’re actually out on the water, especially when you have the tripod strapped in place. That means I need to have these small items easily to hand all the time.
Got a gear question?
Leave it in the comments below!